image of an outboard cavitation plate anode on a white background

ÁNODOS EXTERIORES

Proteja su motor fuera de borda con ánodos marinos para motores fuera de borda de TMP Global

Asegure la longevidad y el rendimiento de su motor fueraborda con los ánodos marinos para motores fueraborda de TMP Global . Fabricados con materiales de alta calidad, nuestros ánodos están diseñados para proteger su motor de la corrosión y la electrólisis en entornos marinos hostiles. Al corroerse en lugar del motor, estos ánodos prolongan la vida útil de su motor fueraborda y mantienen su eficiencia. Ya sea que navegue en agua salada o dulce, TMP Global ofrece una gama de ánodos confiables que se adaptan a su motor y condiciones de operación específicas. Confianza. TMP Global le ofrece ánodos de alta calidad que brindan protección excepcional y tranquilidad en el agua. Explore nuestra colección ahora y proteja su motor fueraborda con ánodos marinos para motores fueraborda. ¡TMP Global !

⛓ Live stock levels | 📲 expert help | 📚 Large catalogue

What do I need to confirm an outboard anode?

Provide the outboard brand and model and use year or serial where possible. Then identify the anode location, trim tab, plate, bracket, or other position. Match shape, thickness, and hole spacing, and confirm fixing type. If you have part numbers from diagrams, use them to validate. Photos of the old anode and the mounting point usually make it easier to confirm quickly when markings are missing.

Should I replace all outboard anodes together?

If multiple anodes are part-worn, replacing them together can help keep protection consistent across the outboard. If you only replace one, the new anode can end up working harder while other anodes are already near the end of life. A practical approach is to replace any anode that is heavily wasted or damaged, then inspect the rest and plan a full set replacement at the next service interval.

Why are my outboard anodes wearing out quickly?

Fast wear can be caused by unsuitable anode material for your environment, missing anodes elsewhere on the outboard, or electrical issues such as stray current in marina conditions. Confirm clean contact surfaces and tight fixings first. Then check that all expected anode locations are fitted. If rapid wear continues, inspect wiring, chargers, and shore power connections for corrosion or faults. Unusual wear is often a sign to investigate the wider setup.

777 productos

Eliminar todos

Outboard anodes, matched by model and mounting point

Anode location is the detail most people miss

Trim tab, plate, and bracket anodes can look similar online, but they are designed for different mounting points. Start by identifying where the anode fits on your outboard, then match the correct shape and fixing style. This reduces wasted time during servicing and helps avoid returns.

Measurements prevent “close enough” mistakes

Hole spacing, thickness, and profile details determine whether an anode sits flush and maintains contact. Measure the old anode or the mounting point, or use a photo beside a ruler. This is especially important on older outboards or units that have been updated over time.

Shop Anodes by Type: Hull Anodes | Saildrive Anodes | Engine Anodes

Fit clean contact surfaces and monitor wear

Remove paint and oxidation where the anode contacts the metal surface and tighten fixings evenly. Inspect after a few trips. Steady wear is normal. Very fast wear can indicate electrical issues or marina conditions, while no wear often points to poor contact or an unsuitable material for your environment.

  • Didn't find what you need?

    We can help you source the exact part you need today!

  • Planning a service?

    Get Service and Maintenance Kits for any model and any application!

Related Products