image of a saildrive anode on a white background

Saildrive Anodes

Saildrive anodes sit in constant contact with seawater and protect the saildrive leg and related underwater fittings. Because saildrive designs vary, choosing the correct anode means matching the exact model, the anode position, and the mounting details. This collection brings together saildrive anodes and related options for common applications.

⛓ Live stock levels | 📲 expert help | 📚 Large catalogue

Do I need the saildrive model to choose the correct anode?

Yes, in most cases. The engine brand does not guarantee the saildrive leg type, and anode shapes are designed around the leg unit. Confirm the saildrive model, year, and serial where possible, then identify the anode position and type. Check dimensions such as thickness and inner diameter for ring anodes, and hole spacing for plate styles. If you cannot find the model, photos of the leg and the old anode help narrow it down.

Why does my saildrive anode have uneven wear?

Uneven wear can happen if the anode is not seated flat, if contact is poor, or if different parts of the system are protected unevenly. Check for paint, oxide, or debris between the anode and the leg. Confirm the correct anode material for your water type, and make sure the fixings are tight and not allowing movement. If wear is very fast, consider marina conditions and possible stray current sources, and inspect bonding connections if your setup uses them.

How often should saildrive anodes be inspected or replaced?

Anodes are consumables, so inspection frequency depends on how and where the boat is used. A common approach is to check at regular service intervals and also mid-season if the boat stays in the water for long periods, especially in marinas. Replace any anode that is heavily wasted, cracked, or loose. The goal is to maintain protection, not to run an anode down to nothing, because once it is gone, the protected parts can start to corrode.

54 produtos

Remover tudo

Saildrive anodes, matched with fewer wrong turns

Identify the saildrive unit, not just the engine

Many people search by engine brand, but the saildrive leg is what determines the anode shape. Start with the leg model and any serial information, then match the anode position and dimensions. This prevents ordering an anode that is correct for the engine family but wrong for the drive unit fitted to the boat.

Ring and plate styles need accurate measurements

Saildrive anodes often use ring or plate designs that must sit flush. If the inner diameter, thickness, or bolt pattern is off, the anode can foul the prop, fail to clamp correctly, or leave gaps that reduce contact. Measuring the old anode or the mounting area is the simplest way to avoid a mismatch, especially on older saildrives.

Shop Anode Types: Sterndrive Anodes | Engine Anodes | Hull Anodes

Clean contact surfaces are essential on saildrives

Saildrive legs can oxidise, and paint edges can creep into contact areas. When fitting, clean the mating surfaces so the anode has direct metal-to-metal contact, and tighten fixings evenly. Inspect mid-season, because saildrives can waste anodes faster in marinas or where the boat sits for long periods, and early checks can highlight unusual wear patterns.

  • Didn't find what you need?

    We can help you source the exact part you need today!

  • Planning a service?

    Get Service and Maintenance Kits for any model and any application!

Related Products