image of a marine kicker speaker with purple ambient lighting behind the grill on a white background

Speakers

If you are upgrading boat audio, speakers are usually the first place to start. This collection covers marine speakers for a range of installs, from replacing tired originals to building a system with dedicated zones.

⛓️ Niveaux de stock en direct | 📲 aide d'experts | 📚 Vaste catalogue

51 produits

Tout effacer

Vous achetez pour une entreprise maritime ?

Demandez l'ouverture d'un compte commercial TMP Global ou envoyez-nous votre liste de SKU pour connaître les prix commerciaux, les stocks et les délais de livraison.

Postulez en moins de 60 secondes, obtenez une approbation en moins de 24h !

Postulez dès aujourd'hui !

Marine speakers that fit first time

Measure the cut-out and depth at the helm or cabin

A speaker that looks right can still foul on mounting depth or the back of a panel. Before you order, measure your cut-out diameter and check how much clearance you have behind the surface. If you are replacing an existing speaker, confirm whether the new grille and mounting pattern will cover the old footprint.

Match the speakers to the rest of your system

Speakers do not work in isolation. Check the listing for impedance and power handling spec types, then match those to your amplifier or head unit plan. If you are running multiple speakers across zones, make sure your wiring layout and channel count make sense before you buy.

Shop Audio by Brand: Kicker Marine Audio | JL Audio Marine | Wetsounds Marine Audio

Plan the wiring and avoid install headaches

Think about where the cables will run and what connectors you have available. Longer runs may need heavier cable, and tight spaces may need careful routing. Confirm you have enough cable length to reach each speaker position and allow for service access later. A tidy plan up front usually makes the install simpler.

What measurements should I check before ordering marine speakers?

Measure the speaker cut-out diameter and the available mounting depth behind the surface. If you are replacing existing speakers, check whether the new speaker’s mounting pattern and grille will cover the old holes. Also note cable access and whether the wiring route is straightforward. These checks help avoid buying speakers that fit on paper but are awkward to install in practice.

How do I make sure new speakers will work with my head unit or amplifier?

Use the impedance and power handling spec types shown on the product listing and compare them to your head unit or amplifier capability. If you are adding an amplifier, consider how many channels you need and how you will wire speakers in each zone. If you are unsure, plan the system layout first, then choose speakers that match the setup rather than choosing speakers and hoping the system will work around them.

What is the most common mistake when upgrading boat speakers?

Skipping measurements and buying based on appearance alone. The next most common mistake is not considering the system as a whole, such as impedance matching, zone layout, and wiring runs. Avoid both by measuring cut-out and depth first, then confirming how the speakers will be powered and wired before ordering.
  • Image of a cleat on a dock-side with mooring rope tied to it.

    Vous n'avez pas trouvé ce qu'il vous fallait ?

    Nous pouvons vous aider à trouver la pièce exacte dont vous avez besoin dès aujourd'hui !

  • Image of the bow of a wooden boat.

    Vous cherchez le bon kit d'entretien ?

    Utilisez notre nouvel outil de recherche de kits d'entretien pour trouver rapidement exactement ce dont vous avez besoin !

Produits apparentés