image of a collection of sterndrive anodes on a white background

MerCruiser Anodes

MerCruiser anodes help protect sterndrives and related underwater hardware from galvanic corrosion. Replacing anodes at service time is one of the simplest ways to reduce corrosion risk on expensive drive components and transom-mounted parts. This collection focuses on anodes used across MerCruiser sterndrive applications and common anode positions.

⛓ Live stock levels | 📲 expert help | 📚 Large catalogue

What do I need to match the correct MerCruiser anode?

Confirm the sterndrive model and year range if known, then identify the anode position you are replacing. Plate, ring, trim tab, and hardware-mounted anodes are not interchangeable. Match the shape and measurements, especially hole spacing and thickness, and confirm the fixing type. If you have an old part number or a parts diagram reference, use it to validate. Photos of the old anode and where it mounts usually make confirmation quicker.

Should I buy individual anodes or a kit for MerCruiser?

A kit can be a good option if it matches your exact drive model and includes all the anode positions you have fitted. Individual anodes are better when you only need one location, or when your drive has been updated and the standard kit does not match. The practical approach is to compare the kit contents to your visible anode locations, then add any missing items individually. Always confirm material choice and measurements either way.

Why are my MerCruiser anodes wearing unevenly or too quickly?

Uneven or rapid wear can be caused by missing anodes, poor contact at one mounting point, unsuitable material for your environment, or electrical issues such as bonding faults and stray current. Check each anode is seated on clean metal contact and tight. Confirm all expected anode locations are fitted. If wear is unusually fast, inspect wiring connections, shore power, and charger setups for corrosion or faults. Wear patterns are often an early clue that something else needs attention.

126 produits

Tout supprimer

MerCruiser anodes, matched to the correct drive and position

Drive model is important, but position is what decides the shape

A single sterndrive can use several different anodes. Before ordering, map the positions on your drive and transom hardware, then match each position to the correct part. This prevents buying a full set that misses a key location, or ordering the correct drive family anode for the wrong mounting point.

Treat hole spacing and thickness as non-negotiable

MerCruiser plate anodes often fail on small measurement differences. If hole spacing is off, the anode will not seat correctly. If thickness changes, contact can be poor or bolts can bottom out. Measure the old anode, or measure the mounting point, then compare to the listing. This is the fastest way to reduce returns.

Shop Anodes by Type: Outboard Anodes | Sterndrive Anodes | Saildrive Anodes

Install for clean contact, then watch wear behaviour

Clean paint and oxidation off contact surfaces before fitting. Tighten fixings evenly and re-check after a few trips. Consistent, steady wear is expected. Very fast wear can indicate electrical issues or missing anodes, while little wear often indicates poor contact. Monitoring wear helps you catch problems early.

  • Didn't find what you need?

    We can help you source the exact part you need today!

  • Planning a service?

    Get Service and Maintenance Kits for any model and any application!

Related Products