image of a sterndrive anode on a white background

Sterndrive Anodes

About this collection

Sterndrive anodes protect key underwater components, including the drive, transom hardware, and related fittings that stay immersed. If anodes are wasted down, cracked, or missing, replacement is a straightforward job that can reduce avoidable corrosion on expensive parts. This collection focuses on anodes used on sterndrive systems.

⛓️ Live stock levels | 📲 expert help | 📚 Large catalogue

380 products

Clear all

Buying for a marine business?

Apply for a TMP Global trade account or send us your SKU list for trade price, stock and lead time.

Apply in under 60s, Get approved within 24hrs!

Apply Today!

Sterndrive anodes, selected by the details that prevent mistakes

Drive model first, then the exact anode location

Sterndrive anodes often exist in several places, and each has its own shape. Before ordering, identify whether you need a plate anode, ring anode, trim tab anode, or a small anode on hardware such as rams. It is common to order the right brand but the wrong location. Mapping the locations on your sterndrive first helps you buy the correct parts in one order.

Avoid “close enough” on hole spacing and thickness

A plate anode that looks similar can still be wrong if hole spacing is off by a few millimetres or if the thickness changes how it sits. Measure the old anode or the mounting points, and compare to the listing. If your sterndrive has been repaired or updated, trust what is fitted today rather than what you think should be there.

Shop Anode Types: Sail Drive Anodes | Hull Anodes | Outboard Andoes

Fit for clean contact and check again mid-season

An anode needs clean metal contact. Remove paint from the contact area, clean the mating surfaces, and tighten fixings evenly. After a few trips, check that the anode has not loosened and that it is wasting normally. Very fast wear can indicate stray current issues, while no wear can indicate poor contact or the wrong material for your water.

What information do I need to match sterndrive anodes correctly?

Confirm the sterndrive brand and model, plus year range if you know it. Then identify which anode location you need, such as cavitation plate, transom plate, trim tab, or other hardware. Measure the old anode or check mounting hole spacing and thickness. If you can find part numbers from the old anode, packaging, or diagrams, use them to validate. Photos of the anode location and the old anode are often enough to confirm the correct shape and fixing type.

Should I replace all sterndrive anodes at the same time?

If multiple anodes are part-worn, replacing them together can give more consistent protection across the system. If you only replace one, the new anode can end up working harder while others are already near the end of life. A practical approach is to replace any anode that is heavily wasted, damaged, or missing, then inspect the rest. Many owners replace as part of a scheduled service and check again mid-season, especially in marinas or brackish water.

Why does my sterndrive anode not seem to be working?

If an anode shows little to no wear, it may not have clean metal contact. Check for paint, heavy oxidation, or looseness at the mounting point. Also confirm you are using a suitable material for your water type. If the anode wears extremely quickly, consider stray current sources such as shore power, chargers, or wiring faults, and check bonding straps and connections for corrosion. Missing anodes elsewhere on the system can also change how quickly the remaining ones waste.
  • Image of a cleat on a dock-side with mooring rope tied to it.

    Didn't find what you need?

    We can help you source the exact part you need today!

  • Image of the bow of a wooden boat.

    Looking for the right service kit?

    Use our new service kit finder tool to quickly match with exactly what you need!

Related Products